Any interest in G506 shields/baffles?

[pfarber]

My truck seems to have the hard to find left and right splash shields and the front cross member (lower) shield (not the one that goes from the radiator support to brush guard, the one that attaches to the frame).

Any (even casual) interest??

[pfarber]

This is all I could find of the 'Baffle' in the SNL

baffle.JPG (47.75 KiB) Viewed 85794 times

There is no real picture of the lower engine shields/baffles.

The Part number for the above is

Z Baffle, CV-3661510 Group 0502 (the parts diagram in the SNL refers to Group 0501 but that is incorrect)

baffle1.JPG (63.77 KiB) Viewed 85794 times

[retro-roco]

What kind of interest are you seeking? I have one, but am missing the other. Are you selling, or thinking about re-popping?

Here's the one I have...

P1003072.jpg (223.99 KiB) Viewed 82762 times

[pfarber]

Here is the 'family' of baffles. There are two others, the are small triangle shaped on the radiator support cross member. I have a photo but my camera batteries died... will post them after a charge.

Yes, the lower front radiator baffle is mangled, but I have another one on another truck.

rs_DSCN0335.jpg (71.71 KiB) Viewed 85790 times

They are in their proper relative positions. The CCKW also has baffles, but not like these (as far as I can tell).

[pfarber]

This was posted on Jim Carters web site:

http://www.oldchevytrucks.com/blog/inde ... l-1934-46/

pans.PNG (206.69 KiB) Viewed 85788 times

The ones in the photos are actually reversed. The 'straight' side goes toward the motor, the 'jagged' side mounts to the frame. Also the squared off portion is the rear, not the front.

The large hole in my photo on the drivers side is for the exhaust manifold to pass through. The passenger side holes are still bot of a mystery. One hole is for the draft tube. Don't know what the other hole could be for.

[retro-roco]

Paul,

Please let me know if you ever decide to sell these, particularly the driver side.

[pfarber]

I am planning on parting out my last truck. Sold my CCKW and parts G506 to prepare to move.. the Wooden Ben Hur and G506 (with all the hard to find parts) is next.

Expect to see them listed here and on Facebook G506 group in the next week.

Be prepared to be shocked at the prices.

[retro-roco]

Thanks for the warning. I'll be watching for them.

[retro-roco]

any updates on the splash guards?

[retro-roco]

Hi Paul,

Any chance you still have the lower radiator baffle that you showed in your picture with the splash guards?